Skip to Content
Express delivery across the EU over €75 · 30-day returns

Bathroom lighting: how to light the mirror and the room without face shadows

17 November 2026 by
Graziano Costantino

Home lighting guide

Find out where to put the light around the mirror, which colour to choose for make-up or shaving and what the IP rating means. Add a decorative bulb too, to give the room atmosphere.

Why it matters, at home or in a venue

The bathroom is the room where you look at yourself most closely: you wash your face, put on make-up, shave. Bad light shows straight away, because the shadows under your eyes and chin change how you look in the mirror. Well-planned light shows colours and details as they really are.

The typical problem is a single ceiling light, right above your head. The light comes from above, hollows out the eye sockets and lengthens the shadow under the nose and chin. The face looks more tired, and putting on make-up or shaving becomes harder.

The solution is to split the light into two parts: a functional one at the mirror, for precise tasks, and an ambient one, softer, that makes the room pleasant. The same goes for the bathroom of a bar, a restaurant or a shop, where customers look at themselves in the mirror and should feel at ease.

What to look for, explained simply

For the mirror the rule is simple: the light must come from the front or the sides and illuminate the face evenly. Two light points at the sides of the mirror, at face height, are a very common solution. Alternatively, you can put a long light above the mirror, which lights it across its whole width.

The colour of light is measured in kelvin (K). Around 2700 K it is warm and yellowish, at 4000 K it is neutral, whiter and truer. For make-up or shaving, neutral or slightly warm light, between 3000 and 4000 K, works best, because it shows skin tones without altering them. The amount of light, on the other hand, is measured in lumens (lm): the mirror needs more of them than the rest of the room.

Then there is the IP rating, a two-digit code that tells you how well a fitting resists dust and water. The first digit concerns dust, the second water, and the higher the number, the stronger the protection. For example, IP44 indicates protection against splashing water. Always read the rating on the fitting's data sheet and, for electrical work, ask an electrician.

Bulby's tips

  • Put the light in front of your face or at the sides of the mirror, never only above your head.
  • For make-up or shaving, choose neutral or slightly warm light, between 3000 and 4000 K.
  • Read the IP rating on the fitting's data sheet and choose protection suited to the area near water.
  • Separate the mirror light from the ambient light, with two different switches.
  • Use a warm decorative bulb as secondary light, in a corner away from splashes.

The most common mistakes

The most common mistake is the ceiling light on its own. It leaves your face in shadow exactly where you want to see yourself clearly. Always add a light near the mirror.

Another mistake is choosing the wrong colour for the mirror. At 2700 K, make-up may look different from how it will in daylight, while very cold light makes skin look dull and harsh. An intermediate tone, neutral or slightly warm, is a balanced choice.

The third mistake is neglecting water. A fitting not suited to humidity, placed near the shower, can deteriorate or become dangerous, so always check the IP rating and, if in doubt, ask for advice. Also avoid lights that dazzle and shine straight into your eyes: they are uncomfortable and don't help you see better.

Ideas for using it well

Try this arrangement: two lights at the sides of the mirror, with neutral light between 3000 and 4000 K, for precise tasks, and a warmer ambient light, on the ceiling or a wall, to switch on alone in moments of relaxation. With separate switches you choose the right scene: bright in the morning, soft in the evening.

If you want a touch of atmosphere, a decorative bulb with an exposed filament or coloured glass can become a small furnishing element. Fit it in a fitting with an IP rating suited to the damp environment, put it in a corner away from splashes and choose a warm tone, around 2700 K. Use it as secondary light, not for make-up.

In a small bathroom, a mirror with an integrated light may be enough, as it takes up little space. In a venue's bathroom, think of the customer: front, even light at the mirror, soft atmosphere in the rest of the room. In both cases, make sure no areas are left too dark.

In short

  • To see yourself properly in the mirror, the light must come from the front or the sides, not only from above.
  • Neutral or slightly warm light, between 3000 and 4000 K, shows skin tones without altering them.
  • The IP rating tells you how well a fitting resists dust and water: always check it in the bathroom.
  • A warm decorative bulb adds atmosphere, but it does not replace the mirror light.

Find your bulb

Free shipping across the EU and 30-day returns.

Go to shop
How to light your living room in layers: general, accent and ambient light